Loading ...
Loading ...
Loading ...
6
ENG
Inside Outside
USING YOUR DISHWASHER
Before using your dishwasher:
Always use salt intended for dishwasher use.
The salt container is located beneath the lower basket and should be filled as explained in the following:
WARNING!
• Only use salt specifically designed for dishwashers use!
Every other type of salt not specifically designed for dishwasher use, especially table salt, will damage the water
softener. In case of damages caused by the use of unsuitable salt the manufacturer does not give any warranty
nor is liable for any damages caused.
• Only fill with salt before running a cycle.
This will prevent any grains of salt or salty water, which may have been spilled, remaining on the bottom of the
machine for any period of time, which may cause corrosion.
Please follow the steps below for adding dishwasher salt:
1. Remove the lower basket and unscrew the reservoir
cap.
2. Place the end of the funnel (supplied) into the hole
and pour in about 1.5kg of dishwasher salt.
3. Fill the salt container to its maximum limit with water,
It is normal for a small amount of water to come out
of the salt container.
4. After filling the container, screw back the cap tightly.
5. The salt warning light will stop being after the salt
container has been filled with salt.
6. Immediately after filling the salt into the salt
container, a washing program should be started
(We suggest to use a short program). Otherwise the
filter system, pump or other important parts of the
machine may be damaged by salty water. This is out
of warranty.
1. Set the water softener
2. Loading the salt Into the softener
3. Loading the basket
4. Fill the dispenser
Loading The Salt Into The Softener
NOTE
Please check the section 1 “Water Softener” of PART II: Special Version, If you need to set the water softener.
If your model does not have any water softener, you may skip this section.
NOTE
Loading ...
Loading ...
Loading ...