Loading ...
Loading ...
Loading ...
29
ENG
Remove the rinse reservoir cap by lifting up the handle .
Pour the rinse aid into the dispenser, being careful not
to overfill.
Close the cap after all.
Filling The Rinse Aid Reservoir
Adjusting the rinse aid reservoir
To achieve a better drying performance with limited rinse aid, the dishwasher is designed to adjust the
consumption by user. Follow the below steps.
1. Open the door, Switch on the appliance.
2. Within 60 seconds after step 1, press the Rapid button more than 5 seconds, and then press the Delay button
to enter the set model, the rinse aid indication blinks as 1Hz frequency.
3. Press the Rapid button to select the proper set according to your using habits, the sets will change in the
following sequence: D1->D2->D3->D4->D5->D1.
The higher the number, the more rinse aid the dishwasher uses.
4. Press the Power button to end the setup model.
Rinse aid level Selector position
D1 D1-> Rapid Light bright
D2 D2-> 90 min Light bright
D3 D3-> Rapid 90 min Light bright
D4 D4-> ECO Light bright
D5 D5-> Rapid ECO Light bright
Loading ...
Loading ...
Loading ...