Loading ...
Loading ...
Loading ...
5
2. Position Your Dehumidifier
For best results, operate your dehumidifiers in an enclosed area. Close all doors and
windows. Place your dehumidifier away from obstructions, and keep it away from anything
that could block airflow into and out of the dehumidifier.
3. Set up the Drainage
This dehumidifier has an internal pump that will automatically drain the condensate out via
the long drain hose. Before turning on the dehumidifier, make sure the hose has been
connected to the drain outlet properly.
① Uncoil the entire hose;
② Attach the hose to the drain outlet directly;
③ Place the unattached end in a sink, drain, bucket or outdoors – anywhere that water can
drain out safely. ( Ensure there are no kinks or other obstructions that will stop the water to
flow.)
NOTE:
• Ensure that water which runs to outdoors does NOT create a slip hazard.
• If you use a bucket or other container for water collection, check it regularly to prevent overflows.
• The drain hose for the water pump can drain up to 15ft vertically. More than 15ft may cause water
back up to the pump resulting in leakage.
• When turning off the dehumidifier, please take the hose out from the water collection container to
avoid the water back-flow causes water leakage.
• The dehumidifier won’t drain without connecting the drain hose.
4. Plug in Electrical Cord
The dehumidifier needs to be plugged into a properly grounded 120 volt outlet rated for at
least 13 amps. Uncoil the power cord and plug it firmly into a suitable outlet.
NOTE: When the dehumidifier has been plugged in, the icon on the control panel display will
IMPORTANT
Please let the dehumidifier stand upright for 24 hours before initial plugging in.
Loading ...
Loading ...
Loading ...