Loading ...
Loading ...
Loading ...
7
humidity level. When you are pressing the Up or Down button to set the target humidity
percentage value, this digital number will turn to display the previous setting value and keep
blinking.
Run Icon: Run icon lights up when the fan is running, and lights off when the fan stops
running.
Dehumidify Icon
：
Dehumidify icon flickers typically because the compressor has not
kicked in. It usually happens ① hen the dehumidifier is under the 3-minute compressor
delay status; or ② when the dehumidifier is programmed to delay-start (AUTO ON TIMER).
MAX Icon: Max Icon lights up when the set humidity value is 10% and the dehumidifier
enters into Continuous Mode.
Defrost Icon: Defrost icon flashes when then dehumidifier is defrosting. The
dehumidifier begins to defrost when the frost has accumulated on the interior of the
dehumidifier. When the dehumidifier is defrosting, the fan is running, but the compressor is
not. The dehumidifying function will cease until the frost has melted. When defrosting is
complete, the Defrost icon will disappear and the dehumidifier begins to dehumidify again
automatically.
NOTE: The frequent defrost process indicates that the room temperature is too cold. Therefore, if the
room temperature is lower than 60°F, please consider adding heat to promote proper drying.
Pump Icon: The Pump icon lights up when the pump is in good condition. Typically,
the Pump icon lights up once the dehumidifier is turned on. The Pump icon flashes when the
pump is working to drain the condensate out.
6. Turn the Dehumidifier on
Press the Power button to turn the dehumidifier on. When the dehumidifier is turned on, the
icon
will turn off, and the
icon
will turn on.
7. Check the Room Humidity
Check the room humidity readout (
%RH
) on the control panel.
Loading ...
Loading ...
Loading ...