Audio Control MODELP250EQ Architect Black 2-Channel High-Current Amplifier

User Manual - Page 16

For MODELP250EQ.

PDF File Manual, 24 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
16
Ventilation
This may be as good a time as any to have
“the talk” about ventilation. The Architect
model P250 EQ features a cool-running


thermally controlled fans. This is a pow-

requires plenty of good ventilation to
properly cool.
Please be advised that no more
than 4 Architect may be stacked
together. Any more than that,
then an empty rack space above
and below is required for adequate
ventilation.
-
tions and ensure that your rack
room meets these requirements.

sensor will put it into standby mode,
allowing the heatsink to cool down.


reactivate. If this occurs often, identify the
cause of the problem and take corrective
action, for example:
Provide additional ventilation
Do not install in a sealed location

Install a fan in the rack

not overloaded with speaker im-
pedances below the recommended
minimum
Check that there are no short
circuits in the speaker cables or
speakers. Note: Each zone will shut

circuit is detected.
1U
1U
1U
1U
1U
Ventilation
Ideal Spacing 1U rack space or more
above and below each pair
No more than four units can be
stacked without a rack space be-
tween them. Allow 1U rack space
or more above and below each
stack of four.
Loading ...
Loading ...
Loading ...