Loading ...
Loading ...
Loading ...
4
Spirit Fitness
• ASTM F2115-05 Specications 6.1.2.11—The
recommended minimum clearance required around
each treadmill for access to, passage around, and
emergency dismount shall be stated. The minimum
dimensions are to be: 0.5 m (19.7 in.) on each
side of the treadmill, and 1 m (39 in.) behind the
machine.
SAVE THESE INSTRUCTIONS - THINK SAFETY!
IMPORTANT ELECTRICAL
INSTRUCTIONS
WARNING
NEVER use a ground fault circuit interrupt (GFCI)
wall outlet with this treadmill. As with any appliance
with a large motor, the GFCI will trip often. Route
the power cord away from any moving part of the
treadmill including the elevation mechanism and
transport wheels.
NEVER remove any cover without rst disconnecting
AC power. If voltage varies by ten percent (10%)
or more, the performance of your treadmill may be
affected. Such conditions are not covered under your
warranty. If you suspect the voltage is low, contact
your local power company or a licensed electrician
for proper testing.
NEVER expose this treadmill to rain or moisture.
This product is NOT designed for use outdoors,
near a pool or spa or in any other high humidity
environment. The operating temperature specication
is 40 to 120 degrees Fahrenheit, and humidity is
95% non-condensing (no water drops forming on
surfaces).
Circuit Breakers: Some circuit breakers are not
rated for high inrush currents that can occur when a
treadmill is rst turned on or even during use. If your
treadmill is tripping the circuit breaker (even though
it is the proper current rating) but the circuit breaker
on the treadmill itself does not trip, you will need to
replace the facility breaker with a high inrush type.
This is not a warranty defect. This is a condition we
as a manufacture have no ability to control. This part
is available through most electrical supply stores. The
electrical outlet used should have a dedicated 20
amp circuit breaker.
Loading ...
Loading ...
Loading ...