Loading ...
Loading ...
Loading ...
NOTE: When using a safety pressure relief valve, point the safety pressure relief valve
away from your body. Use the pull ring on the safety relief valve; open the relief
valve to vent any pressure inside the tank before attempting to service tank.
OPERATING INSTRUCTIONS
1. IMPORTANT: Always operate the compressor BELOW the MAXIMUM PRESSURE RATING
of the compressor. Please refer to Application & Specifications Sections of this manual
for details.
2. Always observe the MAXIMUM DUTY CYCLE of the air compressor. Refer to
Compressor Applications and Specifications Section of this manual for details.
Operation exceeding maximum pressure ratings and or duty cycle will result in damage
to air compressor.
3. Your air compressor is equipped with an AUTOMATIC THERMAL OVERLOAD PROTECTOR.
This feature is designed to protect the air compressor from overheating causing
permanent damage to your air compressor. The thermal overload protector will
automatically cut off power to your air compressor should the internal operating
temperature of the air compressor rise above safe levels during excessive use.
4. Should at any time during use, your air compressor automatically shuts off; do not
attempt to restart air compressor. Turn power switch to the air compressor to the OFF
position.
The automatic thermal overload protector will automatically reset when internal
temperature of the air compressor drops below safe levels. After allowing air
compressor to cool off for about 30 minutes, you can safely resume use of the air
compressor by turning on the air compressor.
5. To prevent discharge of your vehicle’s battery, we strongly recommend that you
keep the vehicle’s engine running while using the air compressor. Compressor
performance is enhanced when operating compressor with vehicle’s engine running.
6. IMPORTANT: ONLY OPERATE THE AIR COMPRESSOR IN WELL-VENTILATED AREAS.
About Compressor Duty Cycle: Compressor Duty Cycle refers to amount of time a
compressor can be operated in a given time period, at 100 PSI and at a standard ambient
temperature of 72°F. Duty
Cycle is commonly expressed in percentile as: Compressor On Time/ (Compressor On Time
+ Off Time)% As an example, a compressor that is rated for 25% duty cycle means that
compressor can be operated at: 100 PSI @ 72°F for 10 minutes ON and 30 minutes OFF ⇓
10 min. On / (10 min. On + 30 min. Off) = 10 min. / 40 min. =25% Duty Cycle
DUTY CYCLE REFERENCE CHART
Loading ...
Loading ...
Loading ...