Loading ...
Loading ...
Loading ...
SET UP FOR USE
You can programthe tunerto scan allthe channelsyou receive in your area. You must use the remote control
for the this procedure.
NOTE: Channelmemory programmingis NOTneeded whenconnectedto a cable boxorsatellitebox. Justselect
the TV/VCR channel selectorto the outputchannel of the cable box or satellitebox (Ex CH3). Then select the
channel tobe viewed on the CableBox orSatellite Box.
The channels you no longer receive orseldom watch can
l be deleted from the memory. (Of course, you can add
Plug the TV/VCR power cord into a tbe deletedchannel in
standard AC outlet. ..............
2 Turn on the TV/VCR ] Pressthe MENU button. ".....
Press the POWER button to turn on the _ n.m_._
J
TVNCR. : Press the PLAY/A or STOP/V . _,
button to point to "CHANNEL =_o_,_
3 Select "ENGLISH" or "ESPAIqOL"
Select "ENGLISH" or I -_'- 1
"ESPA!_fOL"-Spanish using the " _
F.FWD/I_- or REW/_I button. ,_,,*e_
"[ ]" indicate the selected lan-
guage.
Press the PLAY/A or STOP/• _
button to point to "AUTO ,,_o,,,_.,
PRESET".
Then press the F.FWD/IP"button.
The tuner scans and memorizes all active channels in
your area.
NOTES:
• The TV/VCR distinguishes between standard "IV
channels and cable channels.
• If you want to play or record a video tape BEFORE
presetting the tuner, you must press the MENU
button. To preset the tuner again, see "CHANNEL
SET UP AGAIN" on page 13.
.'L_ter sca_ning
The tuner stops on the lowest memorized channel.
If you want to recall the selected channels, you can
select the desired channel directly with the remote
control number buttons or CHANNEL • or V.
! SETUP".
Then: press t_._F_=WD/I_, button. .......
2 Select"AOD/DF_LETE CH"
Press the PLAY/A or STOP/• ( .=,,.t_=,_,_
I button to point to "ADD/ [_ ,_,_.r,t_ ]
DELETE CH". "_°"_
Press the KFWD/IP. button.
3 Enter _he desired channel number
Press the PLAY/A or STOP/• I 1
button until your desired channel
number appears. (You can also o8
use the number buttons or the ,_0_,_
CHANNEL A/• button toenter
it) (Example: CHS)
4 Delete (or add) it from (into) memory
Press the EFWD/I_ or REW/'<I button. The channel
nu tuber changes to light red.The channel is deleted from
memory.
• To delete another channel, repeat steps [3] and [4].
• If you press the F.FWDaI_ or REW/al button again,
the channel is memorized again.
Added channel: Light blue.
Deleted channel: Light red.
5 Exit t'ae channel setup mode
Press the MENU button to returns to TV mode.
NOTE: To confirm that channel(s) has been deleted or
added, press the CHANNEL • or • button.
- 12- EN
8LI5
T7008-02
Loading ...
Loading ...
Loading ...