Loading ...
Loading ...
Loading ...
PREPARATION FOR USE
VHF/UHF SEPARATE ANTENNAS
In some areas it will be necessary to use an outdoor antenaa.
VHFIUHF COMBINED ANTENNA
The VI-IF/UHFRod Antenna(not supplied) is detach-
able. Insertthe stem of the antenna intothe hole on the
upper-back portion of the TV/VCR.
Connect the VHF/UHF Rod Antenna or VHF/UHF
Combination Antenna to the ANT. terminal of the
TVNCR as shown in the diagram below.
For the best reception,fully extend the VHF/UHF Rod
Antenna and make the necessary adjustments. (Avoid
touching the top section when adjusting.)
NOTE :
Before pluggingthe Rodantenna intoantenna terminal,
check that the pinisnotbent. If itis bent, straightenthe
pin as illustrated, then plug thepininto antenna terminal.
Cable Plug
(Needs to be straightened) (Straight pin)
VHF/UHF Antenna (Not supplied
RodAntenna
(NotSupplied)
[Fig.4]
NOTE:
The connection of an indoor antenna may not always
give acceptable TV reception.
VHF Antenna (Notsupplied) UHF
Flattwin-leadcable [Fig.5]
CABLE WITHOUT CONVERTER/
DESCRAMBLER BOX
Use this connection if yourcable system connects
direcdy to yourTVNCR without a converter box.
By using this connection you can:
I) Use theTV/VCR remote to select channels
2) Program one or more unscrambled channels for
Automatic TimerRecording.
NOTE: This unit will ONLY recordand view the same
channel.
FromCableSystem
75.._m Coaxial
Cable(Not
°°pp"ed
[Fig.81
Note toCATVsysteminstaller:
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in particular, specifics that the cable ground shall be connected
to the grounding system of the building as close to the point of cable entry as practical.
Antenna/Cable Connections Continued on the Next Page.
- 10- EN
8LI5
T70084)1
Loading ...
Loading ...
Loading ...