Loading ...
Loading ...
Loading ...
Troubleshooting en
57
Fault Cause and troubleshooting
Appliance does not
start.
Mains cable is not inserted.
1. Check whether the socket works.
2. Check whether the mains cable is properly inserted
in the socket and on the rear of the appliance.
Appliance door is not closed properly.
▶ Close the appliance door.
Programme starts
automatically.
You did not wait until programme ended.
▶
→"Terminate programme", Page40
Appliance stops dur-
ing the programme or
cuts out.
Appliance door is not closed properly.
▶ Close the appliance door.
Power and/or water supply has been interrupted.
1. Check the power supply.
2. Check the water supply.
Top basket is pressing against inner door and pre-
venting appliance door from being closed securely.
▶ Check whether the rear panel of the appliance is
being pressed in by a socket or hose holder that
has not been removed.
▶ Arrange the tableware so that no parts project bey-
ond the basket and prevent the appliance door
from closing properly.
Fault Cause and troubleshooting
Appliance door can-
not be closed.
Door lock has been activated.
▶ Close the appliance door with greater force.
Door cannot be closed due to installation method.
▶ Check whether the appliance has been installed
properly.
When closed, the appliance door, its decor or at-
tached parts should not knock against adjacent
cabinets or the worktop.
Lid on the detergent
dispenser cannot be
closed.
Detergent dispenser or lid are blocked by sticky deter-
gent residue.
▶ Remove detergent residue.
Fault Cause and troubleshooting
Filling valves making
knocking noises.
Caused by the domestic installation. No appliance
fault present. Does not affect functioning of the appli-
ance.
▶ Can only be remedied in the domestic installation.
Loading ...
Loading ...
Loading ...