Loading ...
Loading ...
Loading ...
en Troubleshooting
56
Fault Cause and troubleshooting
Special salt refill indic-
ator lights up.
Insufficient special salt.
▶
Add Special salt →Page30.
Sensor does not detect special salt tablets.
▶ Do not use special salt tablets.
Refill indicator for spe-
cial salt does not light
up.
Water softening system is switched off.
▶
Setting water softening system →Page30
Refill indicator for
rinse aid lights up.
Insufficient rinse aid.
1.
Add Rinse aid →Page32.
2. Set the amount of rinse aid to be dispensed.
Refill indicator for
rinse aid does not
light up.
Rinse aid system is switched off.
▶
→"Setting the amount of rinse aid", Page33
Display flashes. Appliance door is not closed properly.
▶ Close the appliance door.
‒ Arrange the tableware so that no parts project
beyond the basket and prevent the appliance
door from closing properly.
Machine Care indic-
ator lights up.
Machine care is recommended.
▶ Run the Machine Care programme without table-
ware.
‒ Use a special machine care product.
The indicator will go out automatically after 3 wash
cycles whether Machine Care is carried out or not.
Fault Cause and troubleshooting
Water is left in the ap-
pliance at the end of
the programme.
Filter system or area under the filters is blocked.
1.
Clean the Filters →Page44.
2.
Clean the Wastewater pump →Page59.
Programme has not yet ended.
▶ Wait until the programme ends or cancel the pro-
gramme with reset.
▶
→"Terminate programme", Page40
Appliance cannot be
switched on or oper-
ated.
Appliance functions have failed.
1. Pull out the mains plug or switch off the fuse.
2. Wait at least 2minutes.
3. Connect the appliance to the power supply.
4. Switch the appliance on.
Appliance does not
start.
The mains fuse has tripped.
▶ Check the relevant fuse.
Loading ...
Loading ...
Loading ...