Loading ...
Loading ...
Loading ...
10
After the wiring of the frame part is completed, the extension cable is introduced into the
cab through the junction box hole in the front of the car head, and the mobile video
recorder is connected.
The cable shall be fixed through the frame of the car itself, and shall not interfere with the
container, so as to avoid the lifting of the container involving the cable.
After the wiring is completed, the cable should be tightened, and the excess part should be left
in the cab.
Cable Layout (4)
Adjusting Camera Angle
When installing the BSD camera, the blind area of vision should be adjusted to ensure that the video
image presented by the blind area camera covers the blind area of driver’s vision.
When the BSD camera is installed on the outside of driver’s ab, the rear of the vehicle or the
rear-view mirror, adjust the camera angle according to the following steps.
According to the requirements of Figure 3-14, place references at the four corners of the
reference area in the blind area.
Connect the camera to the mobile video recorder.
Preview the video image in real time on the local display screen.
Refer to "3.1Camera Installation", loosen the self-tapping screws and lens adjusting screws,
rotate the bracket and body, and observe the image until it covers the reference objects
around the blind area rectangle, and the body accounts for about 1/4 of the image.
Tighten all the screws on the camera, and the blind area vision adjustment is completed.
Loading ...
Loading ...
Loading ...