Loading ...
Loading ...
Loading ...
26
Oil Fired Gas & Diesel • Rev. 4/7/2016
PROBLEM
POSSIBLE CAUSES
SOLUTIONS
BURNER
No hot water
Dead battery
-
Make sure your battery is fully charged.
- If the battery’s charge is not full, please
replace or re-charge your battery.
Damaged thermostat
- Make sure thermostat is connected properly.
- If burner fan does not come on when you
turn thermostat dial, replace thermostat.
Damaged pressure switch
- Make sure pressure switch is connected properly
to burner unit. Take cover off pressure switch by
unscrewing the 4 screws on the front part of the
switch (switch is located on pump). Without
touching the contacts that conduct current, push on
the little button found on the micro switch (button
is located directly above the part that attaches
directly into pump).
- If burner comes on, replace pressure switch.
- If burner does not come on, make sure there
is current going through switch (consult a
professional for this if you do not know how
to do this properly as you can get severely
injured by the electrical current connected to
your machine). If current properly flows
through pressure switch to burner, check
ignitor.
Damaged ignitor
-
Please call a repair center for help to conduct
tests on the ignitor.
-
If you see vapor coming out the top of
the coil when you try to turn the burner
on while the machine is in use, fuel is
passing through the system properly but
the ignitor is unable to produce a spark.
Replace the ignitor.
-
If you don’t see vapor, check the fuel
line.
Plugged filter or no fuel
-
Make sure you have enough fuel in the tank.
- If you have fuel, make sure the filter and
fuel line are not plugged or damaged.
Loading ...
Loading ...
Loading ...