Loading ...
Loading ...
Loading ...
22
The ice machine cleaner contains acids.
DO NOT use or mix with any other solvent-based cleaner
products.
Use rubber gloves to protect hands. Carefully read the material
safety instructions on the container of the ice machine cleaner.
DISCARD the first batch of ice troduced after cleaning.
5. Then open the water faucet of the main water supply, Let the water flow in the unit.
And press the“TIMER/CLEAN”button on control panel for more than 5 seconds, to
enter the self-Cleaning program. Same as above explanation, the water pump runs
for 8 minutes and stops for 3 minutes, one cycle, again one cycle. The total
duration time is 20 minutes for one self-cleaning program. During this process, the
“”symbol will always be on during this period, and the digit window will
indicate the left time. Through this process, It will rinse the water
dividing pipe, evaporator, water pump, silicone pipe, and water tank, etc..
6. After one self-cleaning program complete, then pull out the drain pipe of the water
tank, drain the cleaning solution down to the lower ice storage bin, also shake the unit
slightly to drain out all of the water completely. Then install back the drain pipe to the
water tank slot tightly.
7. Repeat the step 8-9 again for 2 times.
8. Following the above program to clean the ice storage bin .
9. Then this special cleaning program finish, you can return to the regular ice making
mode. And suggest to discard the first batch of ice cube.
Cleaning Suggestion
1) DAILY CLEANING
The ice shovel, door and the water dividing pipe should be cleaned by yourself per
each day. At the end of every day, rinse the ice shovel and wipe the both sides of the door
with a clean cloth.
2) SEMI-MONTHLY CLEANING
The ice shovel, ice bin, water tank, the ice-full detecting plate and the surface of the
evaporator are to be cleaned by yourself semi-monthly according to interior cleaning
program.
3) SEMI-ANNUAL CLEANING
Loading ...
Loading ...
Loading ...