Loading ...
Loading ...
Loading ...
15
the “+” or “-” button, the right digit will flash, the default setting is zero, 1 minute will
add or decrease to each ice making process per each pressing of “+” or “-” button.
After 5 second of setting, the new setting will be remembered by the system.
6. The bad water quality will cause the bad quality of ice cube, and reduce the
transparency of the ice cube.
Automatic self-cleaning program
Start the self-cleaning program: After connecting all of the water pipe, plug on the
main power supply plug, then press “TIMER /CLEAN”
button on control panel for more
than 5 seconds, to enter the Self-Cleaning program. And the “”symbol will always
be on during this period, the left digit will indicate the left time. The total duration time is
20 minutes for one self-cleaning program.
Cancel the self-cleaning program: It takes about 20 minutes to complete one
self-cleaning program. When the program is over, the system will be in
standby mode automatically. And also you can press the “ON/OFF” button on
control panel to cancel the self-cleaning program by force.
Timer setting operation
Delay time range: 1-24 hours, Default time: 1 hour
How to set the ON-Timer: During the unit is in standby mode, press the “TIMER/CLEAN”
button to set the ON-Timer. The “ ”symbol will start to be on, the number “1” above
the symbol will flash to display the set delay time. During the number flashing, press+”、
“-”
button to change the delay time of the timer, 1 hour increasing or decreasing per each
pressing of “+” or “-” button. Five seconds after setting, your desired setting will be
remembered.
How to cancel the ON-Timer: Press the “TIMER/TIMER” button, the number above the
“”symbol will flash to display the present delay time of your ON-Timer, and press
this button once again to cancel the Timer setting, also the “ ” symbol and the
number will disappear. And the second easy way to cancel the ON-Timer is to press the
“ON/OFF” button, it will cancel the ON-TIMER setting by force.
How to set the OFF-Timer：When the unit is working, press the “TIMER/CLEAN” button
to set the OFF-Timer. The “ ” symbol will start to be on, the number
“1” above the symbol will flash to display the setting delay time. During the
number flashing, press+”、“-”
button to change the delay time of the timer,
1 hour increasing or decreasing per each pressing of “+” or “-” button. Five
seconds after setting, your desired setting will be remembered.
How to cancel the OFF-Timer: Press the “TIMER/TIMER” button, the number above the
Loading ...
Loading ...
Loading ...