Loading ...
Loading ...
Loading ...
2. If the indicator LED lamp does not have a green
light, do a check of the installation. Refer to
Indicator lamp in the charging station on page 42
and
To install the charging station on page 19
.
3.9.2 To do the basic settings
Before the product starts to operate for the first time, you
must do the basic settings.
1. Put the product in the charging station.
2. Switch on the product.
3. Push the arrow buttons and the OK button. Select
language, country, date, time and set a PIN code.
Note: For some models, a factory PIN code is
necessary before you select a personal PIN code.
It is not possible to use 0000 as PIN code.
4. Push the Start button and close the hatch to initiate
a calibration process of the product.
Note: If the battery is too low, the product needs
to charge the batteries fully before the calibration
starts. Refer to
Calibration on page 22
.
Note: Make a note of the PIN code. Refer to
Introduction on page 3
.
3.9.3 Calibration
The calibration process is automatic. After the basic
settings are done, the product moves away from the
charging station and stops, while it calibrates some of
the product settings. When the calibration is complete,
the product starts to mow.
3.10 Product settings
You can use the keypad and the display on the product
or the Automower
®
Connect app to do the settings for
the functions of the product. The functions of the product
have factory settings that are applicable for almost all
work areas, but the settings can be adapted to the
conditions for each work area.
3.11 Automower
®
Connect app
The product can connect to mobile devices that have the
Automower
®
Connect app installed. Automower
®
Connect is a free app for your mobile device. You can
use the extended functions for the product in the
Automower
®
Connect app.
• The
Dashboard
shows the current status of the
product. You can select an operating mode for the
product in the dashboard.
• The
Map
shows the current position of the product
and the set centerpoint for the GeoFence function.
• In the
Settings
menu you can set the settings for
the product.
• In the
Statistics
menu you can see the statistics of
the product.
• In the
Messages
menu you can find the previous
Fault messages
and the
Information messages
of
the product.
The Automower
®
Connect app has Long-range cellular
connectivity and Short-range Bluetooth
®
connectivity.
3.11.1 To install the Automower
®
Connect
app
1. Download the Automower
®
Connect app on your
mobile device.
2. Sign up for a Husqvarna account in the
Automower
®
Connect app.
3. An e-mail is sent to the registered e-mail address.
Follow the instructions in the e-mail in less than 24
hours to validate your account.
4. Log in to your Husqvarna account in the
Automower
®
Connect app.
3.11.2 To pair Automower
®
Connect and
the product
Bluetooth
®
communication and the Automower
®
Connect kit for cellular communication is included in
Automower
®
315X.
1. Do steps 1–3 in
To get access to the menu in the
display of the product on page 23
.
2. Use the arrow buttons and the OK button to move
through the menu structure
Accessories
>
Automower
®
Connect
>
Pairing
>
New pairing
.
22
- Installation 1440 - 004 - 24.03.2021
Loading ...
Loading ...
Loading ...