CP.IN.00000014.01 User Manual

Loading ...

INSPIRE 2 SERIES

User Manual

In Dual Controller Mode, when the Master remote controller is primary, it can control

gimbal pitch and pan. When the Slave remote controller is primary, it can control gimbal

pitch, pan and roll.

Dual Remote Controller mode is not available in Russia and Israel.

Setting Up Dual Remote Controllers Mode

Dual Remote Controllers mode is disabled by default. Users must enable this feature on the “Master”

remote controller by through the DJI GO 4 app. Follow the steps below for setup:

“Master” Remote Controller:

1. Connect the remote controller to your mobile device and launch the DJI GO 4 app.

2. Go to the Camera page, and tap

to enter the remote controller settings window.

3. Select “Master” set the remote controller as “Master” remote controller.

4. Enter the connection password for the “Slave” remote controller.

Master

Master ID: 28172d Slave ID: 14f93f

Connection Status:ON Authorization Code:

Set Remote Controller Status

Master and Slave

Remote Controller Calibration

666666

Remote Controller Settings

Slave

OFF

Remote controller cannot link to the aircraft if the remote controller is set as “Slave”.

Meanwhile, the “Slave” remote controller cannot control the orientation of the aircraft. Reset

the remote controller to “Master” in DJI GO 4 app if you wish to link the remote controller to

the aircraft.

“Slave” Remote Controller:

1. Select “Slave”to set the remote controller as “Slave” remote controller.

Search Master