CP.IN.00000014.01 User Manual

Loading ...

INSPIRE 2

SERIES User Manual

Landing Protection Function

Landing Protection will activate during auto landing.

1. Landing Protection determines whether the ground is suitable for landing. If so, the Inspire 2 will

land gently.

2. If Landing Protection determines that the ground is not suitable for landing, the Inspire 2 will hover

and wait for pilot conrmation. The aircraft will hover if it detects the ground is not appropriate for

landing even with a critically low battery warning. Only when the battery level decreases to 0% will

the aircraft land. Users retain control of aircraft ight orientation.

3. If Landing Protection is inactive, the DJI GO 4 app will display a landing prompt when the Inspire 2

descends below 0.7 meters. Tap to conrm or pull down the control stick for 2 seconds to land when

the environment is appropriate for landing.

Landing Protection will not be active in the following circumstances:

When the user is controlling the pitch/roll/throttle sticks (Landing ground detection will

re-activate when control sticks are not in use)

When the positioning system is not fully functional (e.g. drift position error)

When the downward vision system needs re-calibration

When light conditions are not sufcient for the downward vision system

If an obstacle is within 1-meter of the aircraft, the aircraft will descend to 0.7m above the

ground and hover. The aircraft will land upon with user conrmation.

Intelligent Flight Modes

The aircraft supports Intelligent Flight Modes, including TapFly, ActiveTrack, and Tripod Mode. Tap

in DJI GO 4 or press the Function button on the remote controller to enable an Intelligent Flight Mode.

When an Intelligent Flight Mode is enabled, the gimbal camera will record vision system image data

and store it in the ight data record system. It will stop recording when the Intelligent Flight Mode

is disabled. Vision system image data is used to help improve Intelligent Flight Mode security and

accuracy by matching it to its data history.

TapFly

Introduction

With the TapFly feature, users can now tap on the mobile device screen to y in the designated direction

without using the remote controller. The aircraft will automatically avoid obstacles it sees or brake and hover

provided that the lighting is appropriate (< 300 lux) nor too bright (> 10,000 lux).

Using TapFly

Ensure the battery level is more than 50% for the Intelligent Flight Battery. And the aircraft is in P-mode.

Then follow the steps below to use TapFly:

1. Take off and ensure the aircraft is ying at least 6 feet (2 meters) above the ground.

2 meters

ON OFF

Auto Hold

Loading ...

Dji CP.IN.00000014.01 Inspire 2 Standard Kit with Zenmuse X5S Gimbal & MFT 15mm/1.7 ASPH Lens