Tripp Lite SRCOOL3KTP25U Owner's Manual

Loading ...

Enclosure Installation

Preparation

The enclosure must be installed in a structurally sound area with a level floor that is able to bear the weight of the

enclosure, all the equipment that will be installed in the enclosure and any other enclosures and/or equipment that will

be installed nearby. Before unpacking the enclosure, you should transport the shipping container as close as possible to

the final installation location to minimize the distance you will need to move the unit after the protective packaging has

been removed. If you plan to store the enclosure for an extended period before installation, follow the instructions in the

Storage and Service section.

Caution! Read All Instructions and Warnings

Before Installation!

WARNING: The rack enclosure is extremely heavy. Do not attempt to unpack, move or install the enclosure

without assistance. Until it has been properly installed and stabilized, the enclosure is prone to tipping and

could cause property damage and/or personal injury. Use extreme caution when handling the enclosure and

be sure to follow all handling and installation instructions. Do not attempt to install equipment without first

stabilizing the enclosure.

You need several tools (user-supplied):

• 13 mm Wrench

• 18 mm Wrench

• Utility Blade

• Carpenter's Level

• Phillips Screwdriver

• Flat Screwdriver

• 5/32" Allen Wrench

You also need the following hardware (included):

• (50) Phillips Mounting Screws (M6 x 5/8”)

• (50) Cage Nuts (M6)

• (50) Nylon Cup Washers

Unpacking

Conrmthattheshippingcontainerisupright,stableandverifythe

“tip-n-tell” label has not been tripped. Use a utility blade to cut the

shrink-wrap securing the corner protectors. Apply the utility blade

directly over the corner protectors to prevent the utility blade from

scratching the enclosure or cutting the heavy protective plastic

bag beneath the shrink-wrap. WARNING: Do not scratch the

enclosure or cut the heavy plastic bag beneath the shrink-

wrap. Do not push or pull the enclosure while unpacking.

Loading ...

Tripp Lite SRCOOL3KTP25U SmartRack 25U Standard-Depth Rack Enclosure Cabinet