Loading ...
Loading ...
Loading ...
17
Equipment Installation
20
21
20
21
1
2
Installing or Removing Cage Nuts
WARNING: The anges of the cage nuts should engage the sides of the square opening in the rail, not the top
and bottom. Follow the instructions in your equipment documentation to ensure proper installation of your
equipment.
Installing Cage Nuts
1
Locate the numbered square openings in the mounting rails
where you plan to install your equipment. You will install cage
nuts (included) into the square openings in order to provide an
attachment point for the mounting screws (included).
Note: Consult your equipment documentation to determine how many cage
nuts will be required and where they will need to be installed.
2
Fromtheinsideofthemountingrail,insertoneoftheangesof
the cage nut through the square opening. Press it against the side
ofthesquareopening.Eachangeshouldengageonesideofthe
square opening, not the top or bottom.
20
21
20
19
21
3
4
3
Compress the cage nut at the sides slightly to allow the remaining
angetotthroughthesquareopening.Whenthecagenutis
properlyinstalled,bothangeswillprotrudethroughthesquare
opening and will be visible on the outer surface of the mounting rail.
Repeat steps 1-3 until all required cage nuts are installed.
4
After installing the required cage nuts, use the included mounting
screws and cup washers to secure your equipment to the rack rail.
Place the cup washers between the screws and the equipment
mounting brackets.
Note: Your equipment may also include mounting hardware. Read the
mounting instructions that came with your equipment before installing your
equipment.
To Remove Cage Nuts, Reverse Steps 1-3
Note: You may wish to use a cage nut tool (user-supplied) to aid cage nut
installation and removal.
Loading ...
Loading ...
Loading ...