Loading ...
Loading ...
Loading ...
Familiarising yourself with your appliance en
7
4 Familiarising yourself with your appliance
4.1 Control panel
You can use the control panel to configure all functions
of your appliance and to obtain information about the
operating status.
On certain models, specific details such as colour and
shape may differ from those pictured.
1
2 2
1
Display with setting ring
You can use the digital setting ring to set the
appliance via the display.
You will see the current setting values, options
or relevant information.
→"Display", Page7
2
Buttons
You can use the buttons to directly set various
functions.
→"Buttons", Page7
4.2 Buttons
You can use the buttons to directly select various func-
tions.
Button Function
Switch the appliance on or off.
→"Basic operation", Page14
Open the "Operating modes" menu.
→"Operating modes", Page8
Start or pause operation.
→"Basic operation", Page14
Display for HomeConnect. The field
has no further function.
When the symbol lights up, the appli-
ance is connected.
→"HomeConnect ", Page26
Open the control panel to remove the
water tank.
→"Filling the water tank", Page17
4.3 Display
The display is divided into different areas.
Digital setting ring
You can use the digital setting ring on the display to
change the setting values.
When you reach the minimum or maximum value avail-
able, this value remains on the display. If required, use
the setting ring to turn the value back again.
Finely tuned setting values
To fine-tune the setting values, e.g. to set a time to the
precise minute, press and hold the corresponding area
in the setting ring for around 1-2 seconds. The finely
tined setting values are shown in dots.
Status indicator
Status information is shown at the top of the display.
Symbol Meaning
Timer is activated.
→"Setting the timer", Page16
Childproof lock is activated.
→"Childproof lock", Page24
WiFi signal strength for HomeConnect.
The more lines of the symbol are filled,
the better the signal.
If the symbol is struck through , there
is no WiFi signal.
If there is an "x" at the symbol , there
is no connection to the HomeConnect
server.
→"HomeConnect ", Page26
Remote start with HomeConnect is ac-
tivated.
→"HomeConnect ", Page26
Remote diagnostics with HomeCon-
nect for maintenance is activated.
→"HomeConnect ", Page26
Access to different functions.
Settings area
The settings area is in the centre of the display.
You can see current options and settings that have
already been made in the settings area.
You can see other setting options to the left and right
of the settings area, outside of the setting ring.
The menu and other setting options are arranged hori-
zontally. Selection lists for functions are vertically ar-
ranged. Swipe over the display to scroll in the settings
area. To select a function, press the function on the dis-
play.
→"Setting the operating mode", Page14
Possible symbols in the settings area
Symbol Meaning
Go back one setting.
Reset the setting value.
Loading ...
Loading ...
Loading ...