Loading ...
Loading ...
Loading ...
Appliance door en
33
3.
Close the appliance door fully . Grab hold of the
appliance door with both hands (on the left and
right) and pull it upwards and out .
4.
Carefully place the appliance door on a level sur-
face.
Removing the condensate tray
Notes
¡ Wipe down the condensate tray after every steam
operation or before removing it.
¡ Do not clean the condensate tray in the dishwasher
Requirement:The appliance door must be removed.
1.
Press on the left-hand pressure surface
until
the hook is released.
2.
Press on the right-hand pressure surface until
the hook is released.
3.
Tilt the condensate tray forwards slightly until the
lower retaining hooks are released.
4.
Use both hands to pull the condensate tray up-
wards and out at an angle .
Installing the condensate tray
1.
Use both hands to insert the condensate tray
at
an angle .
2.
Snap the hooks on the left and right of the con-
densate tray into the gap .
3.
Push the condensate tray until the hooks on the
right, left and bottom click into place.
a The condensate tray is installed horizontally.
23.2 Attaching the appliance door
WARNING‒Risk of injury!
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
▶ Keep your hands away from the hinges.
When the hinges are not secured, they can snap shut
with great force.
▶ Make sure that the locking levers are always either
fully closed or (when detaching the oven door) fully
open.
1.
Slide the appliance door straight onto the two
hinges
. Slide the appliance door on as far as it
will go.
2.
Open the appliance door fully.
Loading ...
Loading ...
Loading ...