Loading ...
Loading ...
Loading ...
7
Inserting and Removing the Cooking Plates:
1. Insert the cooking plate into the underside of the lid. Place the 2 wide pins into the hinge slots.
Push the locking pin at the top right of the plate in to the aligned hole in the lid, pressing to
ensure that the plate clicks into place.
2. Insert the cooking plate into the bottom of the unit. Place the 2 wide pins into the hinge slots.
Push the locking pin at the bottom left of the plate in to the aligned hole in the base, pressing
to ensure that the plate clicks into place.
3. To remove the plates, open the lid and press the corresponding plate release buttons on the
sides of the unit to release the plates.
Note: Always unplug the appliance and allow it to cool before removing cooking plates.
Troubleshooting:
Questions Answers
Do the indicator
lights show when my
sandwich is done?
No. The indicator lights only indicate power, and that the snack maker
has reached the correct temperature. Ensure you do not leave the snack
maker unattended during use.
How long will it take
to make a toasted
sandwich?
We recommend toasting your sandwiches for around five minutes.
Generally the sandwiches will be ready approximately 2-4 minutes
after adding them to the snack maker, depending on your
preference.
Why are my fillings
spilling over during
cooking?
You may have added too many fillings to your sandwiches. Ensure
that no fillings are ‘overflowing’ when you add the sandwich to the
snack maker. Fillings such as cheese and jam reach very high
temperatures when heated and can spill over.
Cleaning & Care:
• This appliance requires little maintenance. It contains no user serviceable parts. Do not try to
repair it yourself. Refer it to qualified personnel if servicing needed. Always unplug this snack
maker from power source and wait until it cool down before cleaning.
• There is no need to take your snack maker apart for cleaning. Dry with a paper towel to absorb
excess oil. Brush crumbs from the grooves, and wipe with damp cloth and mild soap.
• The cooking plates can be removed and washed in warm soapy water or placed in a
dishwasher.
• Never immerse the unit in water or any other liquid.
• Avoid using abrasive cleaners, scratching or sharp utensils, as they will damage the non-stick
surface.
• Do not use cleansers or oven cleaners on the heating plates.
• To clean handles and other parts, use a damp cloth with mild soap. Should any filling be
difficult to remove, pour a little cooking oil onto the plate and wipe off after 5 minutes, when
the filling has softened.
IMPORTANT! After cleaning, allow the appliance to dry fully before using again.
Do not use the appliance if damp. Ensure the appliance is completely clean and dry before
storing.
Storage:
To store your appliance:
1. Unplug the power cord from the power outlet and clean as above.
2. Allow the appliance to dry fully.
3. Store on a flat, dry, level surface, preferably in its original packaging, and out of reach of
children.
Loading ...
Loading ...
Loading ...