Loading ...
Loading ...
Loading ...
Item United
States and
Canada
European
Economic
Area (EEA+)
Rest of Europe,
Middle East,
and Africa
(RoEMEA)
Latin America
Distribution
(LAD)
Rest of Asia
Pacific (RoAP)
Australia and
New Zealand
(ANZ)
Extra high yield
toner
cartridge*
63B1X00 63B2X00 63B5X00 63B4X00 63B3X00 63B6X00
* This supply item is supported only in MX718 printer model.
For more information on countries located in each region, go to
www.lexmark.com/regions.
MX717 and MX718 Regular cartridges
Item Regular cartridge
Worldwide
High yield toner cartridge
53B0HA0
1
Extra high yield toner cartridge
53B0XA0
2
1
This supply item is supported only in MX717 printer model.
2
This supply item is supported only in MX718 printer model.
For more information on countries located in each region, go to
www.lexmark.com/regions.
Ordering an imaging unit
Extremely low print coverage for extended periods of time may cause imaging unit parts to fail prior to
exhaustion of toner.
For more information on replacing the imaging unit, see the instruction sheet that came with the supply.
Part name Lexmark Return Program Regular
Imaging unit 520Z 520ZA
Ordering a maintenance kit
To identify the supported fuser type, view the label on the fuser. Do either of the following:
• Remove the toner cartridge and the imaging unit. The two-digit fuser type code (such as 00 or 01) can be
seen on the front of the fuser.
Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes.
Extended exposure to light may cause print quality problems.
• Pull down the printer rear door. The two-digit fuser type code (such as 00 or 01) can be seen on the rear of
the fuser.
Notes:
• Using certain types of paper may require more frequent replacement of the maintenance kit.
• The separator roller, fuser, pick roller assembly, and transfer roller are all included in the maintenance kit
and can be individually ordered and replaced if necessary.
Maintaining the printer 242
Loading ...
Loading ...
Loading ...