Loading ...
Loading ...
Loading ...
User's Manual
79
1) Click
Add Group
.
2) Configure the
Group
and
Permission
of the group.
3) Click
Save
.
Related Operations
●
Delete a user/usergroup: Click to delete the corresponding user/usergroup.
◇
The admin and user groups cannot be deleted.
◇
A group cannot be deleted if there is any user in the group.
●
Modify user/usergroup information: Click corresponding to the user. You can modify
information such as username, password, email address, group name, and memo. Click
Save
to
save the settings.
●
Change password: On the
Modify User
page, select the
Change Password
checkbox. Enter the
old and new passwords, and confirm password. Click
Save
after configuration.
The password must consist of 8–32 non-blank characters and contain at least two types of the
following characters: Uppercase, lowercase, numbers, and special characters (excluding ' " ; : &).
Configure the password according to the password strength prompt.
●
Clear all user information: Click
Clear user
under
Setting
>
System
>
Account
>
Account
>
Clear User
.
4.7.9.2.2 ONVIF User
ONVIF users can be separately managed from account users and user groups.
●
The system manages both ONVIF users and user groups. The factory settings cover one group:
admin. You can set up to 18 ONVIF users.
●
ONVIF username cannot be repeated. Each ONVIF user must belong to a group, and can only
belong to one group. The username can be 31 characters at most, consisting of letters, numbers,
"_", "@" and ".".
●
The default ONVIF username and password are both admin. There is one admin by default which
has the highest authority.
Procedure
Step 1 Select
Setting
>
System
>
Account
>
ONVIF User
.
Step 2 Click
Add User
.
Step 3 Configure user information such as username, password, and group name.
Figure 4-83 Add user
Step 4 Click
Save
.
Loading ...
Loading ...
Loading ...