Loading ...
Loading ...
Loading ...
User's Manual
33
4.7.2.2 Port Settings
4.7.2.2.1 Port
You can set the information of the connected ports to access the Camera through different protocols
and configuration tools.
Procedure
Step 1 Select
Setting
>
Network
>
Port
>
Port
.
Step 2 Set the maximum number of clients accessing the Camera at the same time (such as web
client and platform client) and each port value of the Camera.
Figure 4-28 Port
Step 3 Click
Save
.
4.7.2.2.2 ONVIF
Enable ONVIF, and then network video products produced by different manufacturers can
communicate with each other.
Login verification is required by default when ONVIF is enabled.
Procedure
Step 1 Select
Setting
>
Network Settings
>
Port
>
ONVIF
.
Step 2 Select
Open
or
Off
as needed.
●
By turning on ONVIF authentication, login username and password are required when
logging in through ONVIF.
●
Login verification is not required when turning off ONVIF authentication.
Step 3 Click
Save
.
4.7.2.3 Registration
Background Information
Configure automatic registration, and the current device location will be reported to the server
specified by the user when the Camera is connected to internet, so that the client software can use
the server to access the Camera, and the server can perform operations such as live view,
Loading ...
Loading ...
Loading ...