Loading ...
Loading ...
Loading ...
User's Manual
32
Figure 4-27 TCP/IP
Step 2 Configure parameters.
Table 4-18 TCP/IP parameters
Parameter Description
Host Name
Set the name of the current host, with a maximum length of 15
characters.
Ethernet Card
Dual Ethernet cards are supported. Select an Ethernet card and then click
Set as Default
to set it to the default.
Mode
Select a network mode.
●
DHCP mode: Automatically obtains the IP address. The
IP Address
,
Subnet Mask
, and
Default Gateway
cannot be set when DHCP is
enabled. You can check the current IP address regardless if the DHCP
takes effect.
●
Static mode: Manually set
IP Address
,
Subnet Mask
, and
Default
Gateway
, and then click
Confirm
. The web page will automatically
go to the login page of the set IP address.
MAC Address MAC address of the host, which cannot be modified.
IP Version Only IPv4 is supported.
Address Enter IP address.
Subnet Mask
Set a subnet mask as needed. The subnet prefix is a number in the range
from 1 through 255. The subnet prefix identifies a specific network link
and usually contains a hierarchical structure.
Default Gateway
Set a default gateway on the same network segment as the IP address as
needed.
Preferred DNS IP address of DNS.
Alternate DNS IP address of the alternate DNS.
Step 3 Click
Save
.
Loading ...
Loading ...
Loading ...