Loading ...
Loading ...
Loading ...
Inating with the Air Hose
Schrader valves (cars, motorcycles and
mountain bikes) can be attached directly to the
air chuck without any additional attachments.
1. Screw the air hose clockwise into the air
outlet of the inator (Fig. 6).
2. Unscrew the valve cap from the valve stem
(Schrader) of your tire (Fig. 7).
3. Place the air chuck onto the threaded valve
stem (Schrader), then press down on the air
chuck clamp to secure the chuck onto the
valve (Fig. 8).
Fig. 6
Air Outlet
Air hose
Fig. 7
Valve stem
(Schrader)
Valve cap
Fig. 8
Air chuck
clamp
Air chuck
Valve stem
(Schrader)
4. Set the appropriate PSI according to
the label on the driver's side door or the
vehicle's user manual. Then short press the
power button
to initiate ination (Fig. 3).
Inating with Adapters
The air hose can be used with the provided
adapters to inate a variety of items. To use
the adapters lift up the air chuck clamp, insert
your adapter of choice into the air chuck, then
press down on the air chuck clamp to secure the
adapter in place (Fig 9).
Presta Valve Adapter
Presta valves are commonly used on road bikes
and some mountain bikes. To inate a bicycle
tire, you will need to use the Presta valve adapter
1. Loosen the Presta valve locking nut on your
bike's valve stem (Fig. 10).
2. Thread the female end of the Presta valve
adapter onto valve stem of the bicycle tire.
3. Clamp the end of the air chuck down onto
the Presta valve adapter by pressing the air
chuck clamp down until it locks into place
(Fig. 11).
Air chuck
clamp
Fig. 9
Presta valve
adapter
Sports ball
needle
Short
tapered
nozzle
Tapered
nozzle
Fig. 10
To
loosen
To
tighten
Locking nut
Presta valve
stem
7
Loading ...
Loading ...
Loading ...