Auto Joe ATJ-CA100 Ultra Compact Cordless Digital Air Pump Inflator/Power Bank W/ 12-Volt DC Adaptor, USB-Type A Output, SOS LED Flashlight 140-PSI Portable Inflation on Car, Bike, Motorcycle Tires, and Sports Balls

User Manual - Page 5

For ATJ-CA100.

PDF File Manual, 24 pages, Read Online | Download pdf file

ATJ-CA100 photo
Loading ...
Loading ...
Loading ...
Unpacking
Carton Contents
Inator
Air hose
Tapered nozzle
Short tapered nozzle
Sports ball needle
Presta valve adapter
Storage bag
12V DC plug
USB-A to USB-C cable
Manual and registration card
1. Carefully remove the inator and check to
see that all of the above items are supplied.
2. Inspect the product carefully to make sure
no breakage or damage occurred during
shipping. If you nd damaged or missing
parts, DO NOT return the unit to the store.
Please call the Snow Joe
®
+ Sun Joe
®
customer service center at 1-866-SNOWJOE
(1-866-766-9563).
NOTE: Do not discard the shipping carton
and packaging material until you are ready
to use your new cordless digital inator. The
packaging is made of recyclable materials.
Properly dispose of these materials in
accordance with local regulations.
IMPORTANT! The equipment and packaging
material are not toys. Do not let children play
with plastic bags, foils, or small parts. These
items can be swallowed and pose a suocation
risk!
Charging over USB
NOTE: This power station should be fully
charged before use or storage. Check the battery
level indicator for the remaining charge in the
battery.
Using the included USB-A to USB-C cable,
plug the smaller USB-C connector into the
corresponding USB-C port of inator. Then
plug the other end of the cable (USB-A) into a
USB port on your vehicle, or alternatively into a
USB adapter (not included) for charging at an
electrical outlet (Fig. 1).
NOTE: To maximize charging speed, use a USB
adapter rated at 10W or higher.
NOTE: You may also use other USB ports such
as those on computers, wall outlets and power
banks to charge your inator.
Power over 12V DC
NOTE: The 12V DC auto power cable only
provides working power to the device and does
not charge the internal battery. To charge the
battery use the USB-A to USB-C cable instead.
Using the included 12V DC auto power cable,
plug the barrel plug into the barrel jack of the
inator. Then plug the 12V DC plug into the 12V
DC socket of your vehicle (Fig. 2).
Battery Level Indicator
The battery level indicator can be found on the
LCD display, which will illuminate and indicate
the charge level when the unit is being used, and
when the unit is being charged.
The three bars on the indicator corresponds
to low, medium and high.
The three bars will cycle on from left to right
while charging.
Fig. 1
USB-C
USB-A
USB adapter
Fig. 2
12V DC socket
12V DC
plug
5
Loading ...
Loading ...
Loading ...