Loading ...
Loading ...
Loading ...
18
Web Settings
(CONTD)
Image Parameters Settings:
In this menu, you can adjust the same parameters found from the OSD menu. All settings
will save over the OSD settings.
Ethernet Settings:
In this menu, you can adjust ethernet settings of the camera. Below are the standard
settings found on the camera by default. Please power cycle the camera after clicking
“save.”
DHCP OFF DNS 192.168.1.1
IP Address 192.168.1.188 HTTP Port 80
Netmask 255.255.255.0 RTSP Port 554
Gateway 192.168.1.1
VISCA over IP
52381
Use the RTSP Encrypt option to encrypt your RTSP streams.
Reset to Default:
In this menu, you can reset some of the cameras settings.
Reset Simply: Reset ONLY image parameters. IP Settings will
remain the same.
Reset Completely: Factory reset the whole camera – will
default IP address.
Reboot: Does not reset anything, simply just restarts the camera.
Loading ...
Loading ...
Loading ...