Loading ...
Loading ...
Loading ...
12 13
CLEANING YOUR HUMIDIFIER (CONTINUED)
End of Season Cleaning and Storage
Follow the cleaning instructions when the humidifier will not be used for at least one week,
or at the end of the season.
At the end of the season, remove any accessories and discard. Allow the humidifier and
all components to dry completely before storing.
DO NOT store humidifier with water inside the Reservoir or Water Tank.
Pack unit safely and store in cool, dry location.
Step 1
1. Place Housing on Base.
2. Turn Locking Knob to the left toward the lock symbol.
3. Ensure Float Rod is secured in brackets. For detailed instructions, refer to Float Paddle
Installation section.
CAUTION: Improper placement of the Float Paddle could result in leaking or
water not feeding to the Reservoir.
4. Place Tank on Base. Replace Tank Cover.
5. Install Filter Cartridge in back of Housing. See Caring for Your Filter section for tips about
changing and maintaining your Wicking Filter.
Reassembling
After descaling and disinfecting, follow these steps to reassemble the unit:
CLEANING YOUR HUMIDIFIER (CONTINUED)
Disinfecting
Follow steps 1-5 in Before Cleaning section, then follow the additional steps below.
Filter must be removed from humidifier before cleaning. DO NOT clean Filter with bleach solution.
Note: Bleach may stain clothes. It is recommended that you wear rubber gloves during this
process to protect your hands.
1. Add 1 teaspoon of bleach to 1 gallon (3.8 L) of water. Pour the bleach solution
into the Tank.
Note: Using more than 1 teaspoon of bleach to 1 gallon (3.8L) of water may result
in damage to the humidifier.
2. Place Tank on Base. Bleach solution will drain into the Water Reservoir.
3. Soak for 20 minutes, then remove the Water Tank and slowly empty bleach solution
into sink. Rinse Tank with tap water until the smell of bleach is gone.
4. Remove Float Paddle from Reservoir by lifting up on Float Rod and set aside.
5. Empty bleach solution from Base and Reservoir area; rinse with water until the smell
of bleach is gone.
6. Place Float Paddle back in Reservoir, ensuring Float Rod is secured in brackets. For detailed
instructions, refer to the Float Paddle Installation section.
CAUTION: Improper placement of the Float Paddle could could result in leaking
or water not feeding to the reservoir.
Step 1
(3,8 l)
B
1 tsp.
W
1 Gal.
Step 2
Step 5
Step 4
Step 5
Step 3
MINUTES
Step 4
Step 2
Step 6
“Click”
Step 3
“Click”
Loading ...
Loading ...
Loading ...