Loading ...
Loading ...
Loading ...
Beforeyoucall forservice...
Troubleshooting tips
Possible Causes What To Do
Clock and timer do Plug on range is not completely * Make sure electrical l)lug, is l)lugged,, into a live, properly
not work inserted in the electrical outlet, grounded outlet.
A fuse in your home * Replace tile t/so or reset tile circuit breaker:
may be blm_l or the
circuit breaker tripped.
Oven controls improperly set. * See the Using the clock and timer section.
Oven will not self-clean The oven temperature is * ?dh>w the range to cool and reset the controls.
too high to set a self-clemz
operation.
Oven controls improperly set. * See the Using the self-cleaning oven sectiou.
The probe is plugged into * Remove the probe fi'om the oven.
the outlet in the oven.
"Crackling" or This is the sound of the * This is normal.
"popping" sound metal heating and cooling
during both the cooking and
cleaning functions.
Excessive smoking Excessive soil. * Touch the CLEAR/OFFpad. Open the windows to
during a clean cycle rid the room of smoke. XA'ait tmtil the LOCKEDlight
goes off. _4"ipe up the excess soil and reset the clean
cvcle,
Oven door will not Oven too hot. * Alh>w the oven to cool below locking temperature.
open after a clean cycle
Ovennot clean after a Oven controls not properly set. * See the Using the self-cleaning oven section.
Oven was heavily soiled. * Cleau up heavv, spillovers before ,startiu,_ the cleau
cycle. Heavily soiled (>vens may ueed to sell=cleau
again, or for a lou,_er,_ period of time.
"LOCKED"flashes The self-cleml cycle has been * Ch)se the oven door.
in the display selected hut the door is not
closed.
"LOCKED"light is The oven door is locked * Touch the CLEAR/OFFpad. Allow the oven to cool.
on when you want because the temperature
to COOk inside the oven has not
dropped below the
locking temperature.
"F---and a number You have a fm_ction error code. * Touch the CLEAR/OFFpad. Put the oven back into
orletter" flash operadon.
in the display If the function code repeats. * Disconnect all power to the range for ;at least 30
seconds and then reconnect power. If the flmction
err(>r code repeats, call f(>r serxice.
4O
Loading ...
Loading ...
Loading ...