Loading ...
Loading ...
Loading ...
ASSEMBLY 13
Fig. 4
Fig. 5
SS-20D
Turn the locking knob clockwise to tighten. Now, the middle shaft is locked to the lower shaft. (Fig.4)
c.
Slide the upper shaft onto the middle shaft. Line up the two square mounting holes on each tube. Align and
insert the shaft-locking bolt through the aligned holes and into the end. Then, insert the shaft-locking knob into
the end of the bolt from the other side. Tighten the knob by turning it clockwise. (Fig. 5)
NOTICE: Pay attention to the main handle direction when installing the upper shaft onto the middle shaft. The
main handle should be facing in the opposite direction from the snow outlet.
d.
Loading ...
Loading ...
Loading ...