Loading ...
Loading ...
Loading ...
Attaching The Chute Deflector
3. a. Removethe wingknobs fromeach sideof the lower
impellerhousing.
b. Removethe hexlock nut,spacers,andhex boltfrom
the topof theimpellerhousing.SeeFigure3-3.
4. a. Alignthe chutedeflectorin positionon the
dischargeopeningand inserthex boltwith spacer
throughhingeon chutedeflector(spacersfit inside
of hinges).SeeFigure314.
b. Placesecondspaceroverhex bolt insideother
hingeandsecurewith hex lock nut.
c. Securebothsidesof chutedeflectorto impeller
housingusingwingknobspreviouslyremoved.
Attaching The Chipper Chute
(Model Series 460)
5. a. Removethe threecuppedwashersand hexnuts
fromweldstudsaroundthe openingonthe side of
the impellerhousing.SeeFigure3-5.
b. Removethe hexbolts,flat washers,andlock nuts
fromthe twoholeson the upperendof the support
brace.
6. a. Alignthe chipperchuteoverthe weldstuds, sothe
slotinthe bottomof the chuteis facing down.
b. Securechipperchutewith the threecupped
washers(cuppedsideagainstthe chipperchute)
and hexnutspreviouslyremoved.Do nottighten
the nuts at thistime. See Figure316.
Figure 3-4
f
Fgure 3=5
/
/
/
/ /
/
//
/
/
..........1,/
/
/J
/
/
/
//
/
/
Figure 3=6
Your Chipper
Sh redder
IMPORTANT
This unit is shipped
without gasolineor
oil in the engine. Be
certain to service
enginewith gasoline
and oil as instructed
in the separate engine
manual before operat-
ing your machine.
NOTE: All references
in this manualto the
left or right side of
the chipper shredder
is from the operating
position only. Excep-
tions, if any, will be
specified.
NOTE: This Operators
Manual covers a range
of product specifica-
tions for various
models. Characteristics
and features discussed
and/or illustrated in this
manual may not be ap-
plicableto all models.
MTD LLC reservesthe
right to change product
specifications,designs
and equipmentwithout
notice and without
_ncurringobligation.
7
Loading ...
Loading ...
Loading ...