Loading ...
Loading ...
Loading ...
ENGLISH]
Troubleshooting
Checking
+ If you run _ntoany problem using the cacncorder, use the following table to troubleshoot the problem
+ If these instructions do not allow you to solve the problem, take a note of
• The model and serial number marked on the bottom of the camcorder
• Your warranty d applicable
+ Then contact your nearest authorized serwce center
Symptom Explanat=on/Sotutton
You cannot switch the • Check the battery pack _see page 221
camcorber on or the AC power adapter (see page 21]
Start/Stop does not • Check the power set it to CAMERA
operate wh4e recording • You have reached the end of the cassette
• Check the record protection tab on the cassette (see page 251
The camcorder goes • You have left the car'ncorber set to STANDBY
off automatically for more than 5 minutes without using it ['see page 27]
• The battery pack is fully used up {see page 241
The battery pack is • The atmospheric temperature is too low qsee page 24_
quickly exhausted • The battery pack has not been charged fully ['see page 22)
• The battery pack is completely dead, and cannot be recharged
Use another battery pack
You cannot eject the cassette • The battery pack is fully used up
from the compartment • A mechanical fault m,ght have occurred i see page 581
The DATE/TIME indicator flashes • The I,thlum battery ,s not installeb or Is fully useb up Isee page 20)
more than 2 t_meswhen you
set the car'qcorder to CAMERA
The prayback picture is poor • The wbeo heads might be dirty Isee page 56_
You cannot operate • A mechanical fault m,ght have occurred isee page 58)
any funct,ons on the camcorder
A
Loading ...
Loading ...
Loading ...