Loading ...
Loading ...
Loading ...
AUX........................................................ 150mV/50k-Ohm
MIC 1/MIC 2......................................................1.0mV/600-Ohm
Max Output Power....................................................40 Watts x 1
THD at rated output power...............................1% or less at 1 kHz
Frequency Response +/- 3 dB...............................50 Hz to 15 kHz
Signal to Noise Ratio A-Weighted
MIC...................................................................................61dB
AUX..................................................................................72dB
Speaker Outputs.......... ............8-Ohm, 25V, and 70V line outputs
Attenuation Level (MIC 1)....................................................40dB
Tone Controls
Treble...............................................................+/- 10dB, 10 kHz
Bass.................................................................+/- 10dB, 100 Hz
Power Requirement........................120V AC 60Hz/230V AC 50Hz
Power Fuse..................................T 1.2AL 250V for 110-120V and
T 0.63AL 250V for 220-240V
Dimensions, inches (mm) WxHxD......................7.87 x 3.15 x 5.90
(200 x 80 x 150)
Weight, lbs (kg) ..........................................................4.5 ( 2.04)
.........
Input Impedance
External devices which have a built-in Bluetooth feature can be connected to
this amplifier wirelessly to play through the amplifier's speakers. If your amp
is connected to speakers, you will hear audible tones which will help for
connecting.
1. At first be sure that the amplifier is powered on, and turn the volume to low.
Please remember to connect the Bluetooth Antenna at the back panel for
better receiving signal
2. Press the BT/Line button switch in on the front panel, you will hear the
voice "POWER ON" and also "PAIRING", and then the unit is automatically
ready to pair with your external device.
3. Turn on the Bluetooth of your external device.
4. Search for available Bluetooth devices and make sure to be within range
of your amp, and wait for your device to select "BT-RY" on the pairing
devices lists of Bluetooth networks.
5. Once connecting you will hear a voice say,“Your Device is Connected",
then the Bluetooth pairing is successful and your have established a
Bluetooth connection.
6. You can now play music on your external device through the amplifier.
BLUETOOTH OPERATION INSTRUCTION (For PCM21BT only):