Loading ...
Loading ...
Loading ...
FEATURES AND CONTROLS-BACK PANEL
4
6. BT/LINE Input Switch (For PCM21BT only )
Press in, it's Bluetooth Input status, and press it out, it's LINE
input status.
7.Bluetooth Indicator
10
8
9
11
8. Bluetooth Antenna (For PCM21BT only)
The antenna is best receiving for Bluetooth signal.
9.Voltage Switch
This PA amplifier has selectable input voltage from 110V/60Hz
( the standard in USA and CANADA ) to 220V/50Hz ( for
EUROPEAN operation). Please make sure the switch is in the
proper position before operating, otherwise severe damage will
be incurred and not covered by warranty.
10.AC Input
Plug the included power cord into the unit while the power is
switched off, then plug the AC power cord into a porper power
outlet. Please also replace the fuse only with proper rating if
needed (see the fuse rating of T 1.2AL 250V for 110-120V and
T0.63AL 250V for 220V/240V printed at power inlet)
11. Speaker Connection
One or more speakers (4,8 or 16 Ohms) can be connected to the
amplifier with or without transformers. However, before you con-
nect any speakers to the amplifier, the total impedance must be
calculated in order to avoid damage to the amplifier. A total
speaker impedance greater than 8 Ohms or less than 8 Ohms
can cause this damage to occur.
Loading ...
Loading ...
Loading ...