Loading ...
Loading ...
Loading ...
Basic operation en
31
Basic operation
7 Basic operation
B
a
-
s
i
c
operation
7.1 Switching on the appliance
WARNING‒Risk of explosion!
If gas is collecting in the cooking compartment, this
may cause an explosion in the cooking compartment
during ignition.
▶ If the burner does not ignite after 15 seconds,
switch off the appliance and open the door or a win-
dow in the room.
▶ Wait at least 1minute before igniting the burner
again.
1.
Open the appliance door.
2.
Press the temperature selector and set it to the
maximum setting.
3.
Press and hold the temperature selector for a few
seconds until the flame stabilises.
4.
Close the appliance door carefully.
5.
Use the temperature selector to set the temperature.
Do not turn the temperature selector beyond the
minimum setting.
a The appliance starts heating.
Note:Use the function selector to set the additional
functions.
7.2 Changing the type of heating and
temperature
▶
Use the temperature selector to change the temper-
ature.
7.3 Switching off the appliance
▶
Turn the temperature selector to the off position.
Time-setting options
8 Time-setting options
T
i
m
e
-
s
e
t
-
t
i
n
g
o
p
-
t
i
o
n
s
8.1 Setting the short-term timer
The timer has no influence on the functions of the
oven.
Note:You can set the time on the short-term timer from
5 up to 90minutes.
Requirement:The appliance must be in standby
mode.
▶
Use the time selector to set the required cooking
time.
a A signal tone sounds once the time has elapsed.
Note:To cancel the short-term timer, set the remaining
time to zero.
Cleaning and servicing
9 Cleaning and servicing
C
l
e
a
n
-
i
n
g
a
n
d
s
e
r
-
v
i
-
c
i
n
g
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
9.1 Cleaning products
To avoid damaging the various surfaces on the appli-
ance, do not use any unsuitable cleaning agents.
WARNING‒Risk of electric shock!
An ingress of moisture can cause an electric shock.
▶ Do not use steam- or high-pressure cleaners to
clean the appliance.
ATTENTION!
Unsuitable cleaning agents damage the surfaces of the
appliance.
▶ Do not use harsh or abrasive cleaning products.
▶ Do not use cleaning products with a high alcohol
content.
▶ Do not use hard scouring pads or cleaning
sponges.
▶ Do not use any special cleaners for cleaning the ap-
pliance while it is hot.
▶ Only use glass cleaners, glass scrapers or stainless
steel care products if recommended in the cleaning
instructions for the relevant part.
Using oven cleaner in a hot cooking compartment
damages the enamel.
▶ Never use oven cleaner in the cooking compartment
when it is still warm.
▶ Remove all food remnants from the cooking com-
partment and the appliance door before you next
heat up the appliance.
Salt contained in new sponge cloths may damage sur-
faces.
▶ Wash new sponge cloths thoroughly before use.
9.2 Suitable cleaning agents
Only use cleaning agents that are suitable for the differ-
ent surfaces on your appliance.
Appliance exterior
Follow the instructions on cleaning the appliance.
Loading ...
Loading ...
Loading ...