Loading ...
Loading ...
Loading ...
10
Atmosphere Lamp Mode
Press the button to set the brightness of the light to 100%, 75%, 50%, the small dot in the middle of the
display panel lights up, and the interior light automatically enters the atmosphere light mode: the interior light on
(whether the door is open or closed, the interior lights are always on)
Exit the Atmosphere Lamp Mode: Press the button to set the brightness of the light to OFF, the small dot
in the middle of the display board goes out, the interior light exits the ambient light mode and re-enters the smart
control mode.
ON/OFF Power / Mute
To turn the appliance on or off, press and hold the ON/OFF button for 3 seconds.
When the Door ajar alarm activated, the buzzer will sound continuously. Press one time alarm will be closed.
Contact the Service Department for advice.
LOCK
If illuminated, indicates the control panel is locked.
RUN
When unit’s compressor is running, this indicator light will illuminate to signify that cooling mode is currently in
operation.
Demo mode
Press and hold buttons , and simultaneously for 10 seconds, it can enter or exit demo mode.
In this mode, the display panel can operate settings, but the temperature is fixed display 12°C (54°F), all fans, the
compressor does not start.
Defrosting
The unit defrosts automatically in normal operating conditions.
The evaporator behind the rear wall of the unit defrosts automatically. Water will drain through the drain pipe from
the back of the product. Users need to bring the water to the drain or find a appliance to load the water. (If loading
with a appliance, you need to pay attention to clearing the water regularly).
However, frost may accumulate on the evaporator if the unit is repeatedly opened in a high heat or high humidity
location. If this frost pattern does not clear within 24 hours, your unit will require manual defrosting.
Mandatory defrost mode: Press the and at one time for 10 seconds，enter the compulsory defrost
mode.
Loading ...
Loading ...
Loading ...