Loading ...
Loading ...
Loading ...
13
BLADERUNNER
®
X2 ENG
TECHNICAL DATA
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the instruction
book carefully.
BLADERUNNER
®
—A compact, easy-to-use table-top
tool for cutting wood, metal, plastic, and ceramic tile.
Lightweight and portable for use right at the work area.
Blade is stationary while user moves the material for
easier, more precise work.
BEFORE PUTTING THE MACHINE INTO OPERATION
1. All covers and safety devices have to be properly
fitted before the machine is switched on.
2. The blade must run freely.
3. When working with wood that has been processed
before, watch out for foreign bodies such as nails or
screws etc.
4. Before turning on the machine, make sure that the
saw blade is correctly fitted and that the machine’s
moving parts run smoothly.
5. If the cutting operation will produce a high amount
of dust, especially hazardous dust such as ceramic
tile or treated wood, connect an effective vacuum to
the vacuum port (8).
ASSEMBLY AND OPERATION
Action Figure
Guard Arm Installation See Fig. A1,A2
Blade Installation See Fig. B1-B3
Blade Changing See Fig. C
Stabilizer Bracket Adjustment See Fig. D1,D2
Guard Adjustment See Fig. E1,E2
ON/OFF Safety Switch See Fig. F
Rip Cut See Fig. G1-G3
Cross Cut See Fig. H1,H2
Miter Cut See Fig. I1,I2
Internal Cut See Fig. J
Dust Collection See Fig. K
Store the Accessories See Fig. L1-L4
MAINTENANCE
WARNING: Remove the plug from the socket
before carrying out any adjustment, servicing or
maintenance.
To insure proper operation and extend tool life, prevent
dust from accumulating under the Table Insert (5).
a) Be sure to use a vacuum or dust extractor for dusty
cutting operations such as ceramic tile. (See Fig. M)
b) If dust accumulates, remove the Table Insert by
lifting the latch (e). (See Fig. N)
c) Vacuum out the dust in and around the Blade Holder.
(See Fig. O)
d) Reattach the Table Insert securely.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always
store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls free of
dust. If you see some sparks flashing in the ventilation
slots, this is normal and will not damage your power
tool.
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
Voltage
Amperage
No load speed
Cu tti ng c apacit y
Wood
PVC pipe
Aluminum
Steel
Ceramic
Stroke length
Blade type
Blade length
Table size
Protection class
Weight
120 V~60 Hz
5.5 A
3000/min
1-1/2˝
1-1/4˝
3/8˝
1/8˝
3/8˝
3/4˝
T shank
4˝ or less
15-3/4˝x17˝
/ II
14.74 lbs
Loading ...
Loading ...
Loading ...