Loading ...
Loading ...
Loading ...
Safety Rules for Cordless Screwdrivers
a. Hold the power tool by insulated
gripping surfaces, when performing an
operation where the fastener may
contact hidden wiring. Fasteners
contacting a "live" wire may make
exposed metal parts of the power tool
"live" and could give the operator an
electric shock.
b. Always turn off power to an electrical
circuit before working on anything
that is or could be in contact with it,
and place a note on the electrical
panel to warn others not to turn it on.
Failure to turn OFF the power source
prior to installation/removal of cover
plates or electrical products can result
in electrical shock, fires, permanent
injury and/or death.
c. Use clamps or another practical way
to secure and support the workpiece
to a stable platform. Holding the work
by hand or against your body leaves it
unstable and may lead to loss of
control.
d. Do not drill, fasten or break into
existing walls or other blind areas
where electrical wiring may exist. If
this situation is unavoidable,
disconnect all fuses or circuit breakers
feeding this worksite.
e. Battery tools are always in an
operative condition. Be aware of the
possible hazards.
f. Always wear safety goggles or eye
protection when using this tool.
g. Secure the workpiece, never hold it in
your hand or across legs. The drilling
action may cause you to lose control of
the workpiece and injury may occur.
h. When installing a bit, insert the shank
of the bit well within the collet. If the
bit is not inserted deep enough, the
grip of the collet over the bit is reduced
and the loss of control is increased.
i. Do not run the tool while carrying it at
your side. A spinning bit could
become entangled with clothing and
injury may result.
j. Do not use dull or damaged bits and
accessories. Dull or damaged bits
have a greater tendency to bind in the
workpiece.
-4-
SAVE THESE INSTRUCTIONS
c. When battery pack is not in use, keep it
away from other metal objects like
paper clips, coins, keys, nails, screws, or
other small metal objects that can make
a connection from one terminal to
another. Shorting the battery terminals
together may cause burns or a fire.
d. Under abusive conditions, liquid may be
ejected from the battery, avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes,
additionally seek medical help. Liquid
ejected from the battery may cause
irritation or burns.
e. Do not use a battery pack or tool that is
damaged or modified. Damaged or
modified batteries may exhibit
unpredictable behaviour resulting in fire,
explosion or risk of injury.
f. Do not expose a battery pack or tool to
fire or excessive temperature. Exposure
to fire or temperature above 265 °F may
cause explosion.
g. Follow all charging instructions and do
not charge the battery pack or tool
outside the temperature range specified
in the instructions. Charging improperly
or at temperatures outside the specified
range may damage the battery and
increase the risk of fire.
6. Service
a. Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
b. Never service damaged battery packs.
Service of battery packs should only be
performed by the manufacturer or
authorized service providers.
General Power Tool Safety Warnings
Loading ...
Loading ...
Loading ...