Loading ...
Loading ...
Loading ...
'JIg.,| It_Y.*T_/
• Virtual CINEMA DSP
With Virtual CINEMA DSP, you can enjoy all DSP
programs without rear speakers. It creates virtual speakers
to reproduce a natural sound field.
You can listen to virtual CINEMA DSP by setting "IC
REAR LR" in the set menu to NON. Sound field
processing changes to VIRTUAL CINEMA DSP
automatically.
• This unit is not set in the virtual CINEMA DSP mode even if
"1C REAR LR" is set to NON in the following cases:
-- when the 6ch Stereo, DOLBY DIGITAL, Pro Logic, Pro
Logic II, or DTS program is selected;
-- when the sound effect is turned off;
-- when 6CH INPUT is selected as the input som'ce;
-- when a digital signal with a sampling frequency greater
than 48 kHz is input to this unit;
- when using the test tone; or
- when connecting the headphones.
• SILENT CINEMA DSP
You can enjoy a powerful sound field similar to what you
could expect from actual speakers through headphones,
with SILENT CINEMA DSE You can lislen to SILENT
CINEMA DSP by connecting your headphones to 1he
PHONES jack while the digital sound field wocessor is
on. The "SILENT" indicator lights up on the front panel
display. (When sound effects are off, the unit reproduces
the source in normal stereo.)
• If you turn off the sound effects, no sound is output flora the
center speaker, rear speakers, or rear center speaker.
• If you turn off the sound effects while the unit is reproducing
sound lgom a Dolby Digital or DTS signal, the dynanfic range
of the signal is automatically comD_ssed and the unit will
output mix the sounds of the center and rear speaker channels
and output them from the main speakers.
• The volume may be greatly reduced when you turn off the
sound effects or if you set "SOUND 4 D. RANGE (dynamic
range)" on the set menu to M1N. In this case turn on the sound
effect.
.%,:
• During stereo reproduction, you can display information such
as the type, l_armat and sampling frequency of the signal input
from the components connected to this unit.
(While playing a source)
[] Press AMP.
[] Press v to display the information about the
input signal.
• This l_ature is not available when 6CH INPUT is selected or (Format);
the unit is receiving a digital signal with a sampling frequency
greater than 48 kHz.
• The sound from the LFE channel will be mixed and output in:
from the headphones.
• Normal stereo reproduction
Press STEREO/EFFECT to turn off the sound
effect for normal stereo reproduction.
Press STEREO/EFFECT again to tm'n the sound
effect back on.
STEREO
Front panel Remote control
!
STEREO
rate:
flg:
The display shows the signal format. When the
unit cannot detect a digital signal it
automatically switches to analog input.
The display shows the number of input signal
source channels, as follows: For multi-channel
soundlrack such as front 3 channels, rear 2
channels and LFE, the display shows "3/2/
LFE'.
For bilingual broadcasts where 1he signal is
split into 2 channels, the display shows "1+1".
For signals with more 1hun 3 channels the
display shows "MLT'.
The display shows lhe sampling frequency.
When the unit is unable to detect the sampling
frequency "Unknown" shows in the front panel
display.
The display shows the bit rale. When the unit is
unable to detect the bit rate "Unknown" shows
in the front panel display.
The display shows lhe flag - data encoded in a
DTS or Dolby Digital signal that causes this
unit to automatically switch to the appropriate
decoder for playback.
I
27
Loading ...
Loading ...
Loading ...