Loading ...
Loading ...
Loading ...
15
6.0 MAINTENANCE
DISCONNECT POWER AND ALLOW HEATER TO COOL BEFORE ATTEMPTING ANY MAINTENANCE OR
CLEANING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR DAMAGE TO A PERSON.
THE FIREPLACE SHOULD NOT BE OPERATED WITH AN ACCUMULATION OF DUST OR DIRT ON OR IN THE UNIT, AS THIS CAN
CAUSE A BUILD-UP OF HEAT AND SUBSEQUENT EVENTUAL DAMAGE. FOR THIS REASON, THE HEATER MUST BE
INSPECTED REGULARLY, DEPENDING ON CONDITIONS AND AT LEAST AT YEARLY INTERVALS.
6.1 PARTIALLY REFLECTIVE GLASS CLEANING
The partially reflective glass is cleaned in the factory during the assembly operation. During shipment, installation, handling,
etc., the partially reflective glass may collect dust particles; these can be removed by dusting lightly with a clean, dry cloth.
To remove fingerprints or other marks, the partially reflective glass can be cleaned with a damp cloth. The partially reflective
glass should be completely dried with a lint-free cloth to prevent water spots. To prevent scratching, do not use abrasive
cleaners.
6.2 SCHEMATIC DIAGRAM
Loading ...
Loading ...
Loading ...