Loading ...
Loading ...
Loading ...
4 / 4
Reference Guide
© 2022 Spectrum Brands, Inc.
Important Safeguards
1. Read all instructions in their entirety.
2. Familiarize yourself with all warning and caution
statements.
3. Remind all family members of safety precautions.
4. Always have access to your lock’s standard key.
5. If using the Auto-Lock features, make sure you have your
standard key with you to prevent locking
yourself out.
6. Familiarize yourself with the system alerts.
7. Replace low batteries immediately.
8. Dispose of used batteries according to local laws and
regulations.
WARNING:
CAUTION:
This Manufacturer advises that no lock can provide complete
security by itself. This lock may be defeated by forcible or technical
means, or evaded by entry elsewhere on the property. No lock can
substitute for caution, awareness of your environment, and common
sense. Builder’s hardware is available in multiple performance grades
to suit the application. In order to enhance security and reduce risk, you
should consult a qualified locksmith or other security professional.
Prevent unauthorized entry. Since anyone with access to the back panel
can change the User Codes, you must restrict access to the back panel
and routinely check the User Codes to ensure they have not been altered
without your knowledge. The use of a programming code can help
protect your system’s settings.
Exterior
Interior
Battery
Holder
Programming
Button
Turnpiece
Interior
Cover
Powerbolt at a Glance
Lights SoundsAction Troubleshoot
Flashes GREEN x2 2 beepsSuccessful Unlock
Flashes RED x 3 3 beepsIncorrect User Code Check code, and retry
Flashes RED x15 15 beeps
Exceed 3 incorrect
User Code attempts
Wait 1 minute, check code,
and retry
Flashes AMBER x2 2 beepsSuccessful Lock
Flashes RED x10 10 beepsLow battery Install fresh new batteries
Alternate RED/
WHITE Flash x5
5 beepsStuck/Jammed bolt Clear jam and try again
Flashes GREEN x1 1 beep
Factory Reset
Successful
Flashes RED x3 3 beeps
Factory Reset
Unsuccessful
Retry factory reset steps.
Make sure to press the
Programming Button one
more time within 10 seconds
after the long beep.
Flashes GREEN x1 1 beep
Programming
Successful
Flashes RED x3 3 beeps
Programming
Unsuccessful
Review Programming steps
System Alerts
Lock
Button
Number
Buttons
Key
Cylinder
Enable/ Disable User Codes
12
Enable/ Disable Auto-Lock
13
Change Auto-Lock Time Delay
14
Door Rehanding
15
Factory Reset
16
Add/ Change Programming Code
17
1.
Remove interior cover.
PRESS and HOLD
programming button for
15 seconds.
2.
The lock will have a long
beep.
3.
Press programming
button once more.
A factory reset will delete all User Codes and change all programming to factory settings. At
this time, the lock can only be locked or unlocked manually with the key.
Note: Lock must be in a unlocked position to factory reset.
1.
Remove interior cover.
Press programming
button.
2.
Press number .
4.
Enter Programming Code.
5.
Press the button again.
3.
Press the
button.
One Programming Code between 4 to 8 digits can be saved and cannot be the same as any
User Code and cannot be used as a User Code to unlock the lock.
Enable/ Disable Programming Code:
Optional: A Programming Code enables you to make programming changes without needing
to access the Programming Button. This is ideal for landlords to program the lock without
access to the interior programming button.
Note: Once Programming Code is enabled, the Programming Button is disabled and can
only be used to factory reset the lock.
To program the lock with Programming Code:
Programming
Code
Follow the programming steps WITHOUT
PRESSING the PROGRAMMING BUTTON
To disable Programming Code:
Programming
Code
Programming
Code
1.
Remove interior cover.
Press programming
button.
2.
3.
Note: When all User Codes are disabled, all electronic functions will be disabled as well.
The door must be locked or unlocked manually with the key. Repeat the programming
steps to enable the User Codes.
4.
Press the button.
Press number .
Press number .
1.
Remove interior cover.
Press programming
button.
2.
3.
Press number .
Repeat the programming steps to disable the auto-lock.
4.
Press the button.
Press number .
1.
Remove interior cover.
Press programming
button.
2.
4.
Press the button.
5.
Choose and press button
for delay.
3.
5.
Press the
button again.
30 seconds
1 minute
3 minutes
5 minutes
10 minutes
Press number .
Press number .
1.
Remove interior cover.
Press programming
button.
3.
Press the button.
2.
The latch bolt will extend and retract to learn the orientation of the door.
Note: Perform this process for the lock to learn the locking and unlocking direction of the door.
This feature is used for the lock to learn the orientation of your door (left- or right-handed). If
stuck/jammed bolt error continues to occur after performing this step, please make sure there is
no obstruction from strike or door jamb to prevent the bolt from extending.
Press number .