Loading ...
Loading ...
3 / 4
7
Test the lock (review normal operation)
Add user codes (12 max)
Make sure the interior
cover is off. Press the
Program button once.
Press button once. Enter user code. A total
of 12 user codes may
be programmed. User
codes should be 4 to 8
digits in length.
Press button
again.
A C D E
6
To lock your door, press the lock button. The lock will beep twice and
the lock button will flash amber as the deadbolt extends.
To unlock your door, enter the user code. The lock will beep twice and the
lock button will flash green and the deadbolt retracts.
BA
Press number .
B
Confirm that the code(s) added in previous step can unlock the door.
Before you can lock and unlock the door a User Code must be created. Refer to Step 6 for instructions how to create a User Code.
Note: After the rst User Code is created, the latch
bolt will automatically retract and extend to learn
the locking and unlocking direction of the door.
The lock button will indicate success or failure.
GREEN: Success RED: Unsuccessful
Adding a One-time User Code
8
Delete a Single User Code
9
Delete ALL User Codes
10
Enable/ Disable Audio
11
During User Code programming,
a time out will occur if the keypad
is not pressed for 5 seconds and
you will need to restart the
procedure.
For security reasons, the
first 4 digits of each User
Code must be unique. For
example, you are unable to
program a user code 1-2-3-4-5
as well as user code 1-2-3-4-6.
1.
Remove interior cover.
Press programming
button.
2.
4.
5.
3.
Up to 2 One-time User Codes can be saved. One-time User Codes should be 4 to 8 digits in length.
The One-Time User Code will be deleted automatically after it is used. The same One-Time User
Code can be created again after it’s used.
6.
Press the button.
Press the button
again.
Enter the one time
user code.
Press number .
Press number .
1.
Remove interior cover.
Press programming
button.
2. 4.
Enter the user code
you want to delete.
7.
Press the
button again.
6.
Enter the user code
being deleted again.
5.
Press the
button again.
3.
Press the
button.
If unsuccessful:
Make sure you entered the
same user code in steps 4
and 6.
Test code while the door
is open. Test the User Code
to make sure it no longer
unlocks the door.
If a button is not pressed within 5 seconds, the system will time out, and you will need to
restart the procedure.
Press number .
1.
Remove interior cover.
Press programming
button.
2.
4.
5.
Press the button again.
3.
Press the
button.
Note: Keypad locking function will be disabled when User Codes are deleted. The lock
can only be operated manually by a key during this time.
Press number .
Press number .
1.
Remove interior cover.
Press programming
button.
2.
3.
Note: LED status indicator will still function once audio is disabled. Repeat the
programming steps to enable the audio.
4.
Press the
button.
Press number .
Press number
again.
Loading ...