Loading ...
Loading ...
Loading ...
29
OPERATION
ENGLISH
Extra Options and
Functions
You can use the extra options and functions on
some programmes to customize the cycle.
Customising a Washing
Programme
Each programme has default settings that are
selected automatically. You may also customise
these settings using these buttons.
Water
This appliance detects the amount of laundry
automatically, then sets the water level. However,
manually increasing the water level may be
required and recommended to avoid linting and
unbalanced errors when the load is bulky but
lightweight.
• Press
Water
option until the desired water level
is selected. The water level is indicated on the
display.
• When water level is automatically detected, it
may differ depending on the amount of laundry
even though the same water level is indicated on
the control panel.
Wash
Adjusting the wash time setting modifies the cycle
times and/or wash actions.
• Press
Wash
button until the desired wash time is
selected. The wash time is indicated on the
display.
Rinse
Use this option to change the number of rinses.
• Press
Rinse
button to change the number of
rinses. The number of rinses is indicated on the
display.
Spin
Use this option to change the spin level.
• Press
Spin
button until the desired spin level is
selected. The spin level is indicated on the
display.
• When you press the
START/PAUSE
button after
selecting this option, the remaining time is
indicated on the display.
Using Basic Options
You can customize the programmes by using the
following basic options:
Steam (For Steam Models Only)
Adding this option helps provide better cleaning
results.
WashWave (For Non-Steam Models)
Use this option to select the wash strength.
TurboClean
Adding this option reduces the programme time
but the similar washing results will be provided.
NOTE
• If the water pressure of tap water is less than 100
kPa, water does not come out from the
JetSpray
nozzle on the top of the drum, but water comes
out from the detergent drawer.
Temperature
Use this option to change water temperature.
Follow the next steps to use a special
option.
1
Press the
POWER
button.
2
Select a washing programme.
3
To use special options,
•
Steam
: Press the
Steam
button.
•
WashWave
: Press the
WashWave
button.
•
TurboClean
: Press the
TurboClean
button.
•
Temperature
: Press the
Temperature
button.
4
Press the
START/PAUSE
button.
Loading ...
Loading ...
Loading ...