Loading ...
Loading ...
Loading ...
ELECTRICAL GROUNDING INSTRUCTIONS
8. ELECTRICAL GROUNDING INSTRUCTIONS
WARNING
This indoor gas cooking appliance is equipped with a three-prong (grounding) plug for your protection
against shock hazard and should be plugged directly into a properly grounded three-pronged receptacle.
Where a standard two-prong wall receptacle is encountered, it is the responsibility and litigation the
customer to have it replaced with a properly grounded three-prong wall receptacle.
Do not cut or remove the grounding prong from the power cord.
Before connecting plug to the cord, disconnect the electrical supply.
CAUTION
Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and
dangerous operation. Verify proper operation after servicing.
9. CONNECT RANGE TO GAS SUPPLY
Most localities will require that the stove shutoff valve and gas connections be installed by a certified
technician or plumber. These instructions are for a professional. Gas installation specifications and
regulations may vary so please consult your local codes before proceeding.
1. Install a manual gas line shut-off valve in the gas line as follows:
a. in an easily accessed location outside the range
b. in the gas piping external to the appliance
2. Install male 1/2” flare union adapter to 1/2” NPT internal thread elbow at inlet of regulator.
On models equipped with standard twin burners, install the male pipe thread end of the 1/2” flare union
adapter to the 1/2” NPT internal thread at inlet of pressureregulator.
Use a wrench on the regulator fitting to avoid damage.
17
Loading ...
Loading ...
Loading ...