Kobe INX28 SQH-700-1 Range Hoods

INSTALLATION INSTRUCTIONS AND OPERATION MANUAL - Page 12

For INX28 SQH-700-1. Series: INX28 SQ-700-1
Also, The document are for others Kobe models: INX2830SQB-700-1, INX2830SQH-700-1

PDF File Manual, 25 pages, Read Online | Download pdf file

INX28 SQH-700-1 photo
Loading ...
Loading ...
Loading ...
9
MAINTENANCE
For optimal appearance, clean the range hood surface and filters regularly.
To Clean Hood Surface
CAUTION: NEVER USE ABRASIVE CLEANERS, PADS, OR CLOTHS.
***Regular care will help preserve its fine appearance.
1. Use only mild soap or detergent solutions. Dry surfaces using soft cloth.
2. If hood looks smudged (stainless steel hood), use a stainless steel cleaner to clean the surface
of the hood. Avoid getting cleaning solution onto or into the control panel. Follow directions of
the stainless steel cleaner. Caution: Do not leave on too long as this may cause damage to
hood finish. Use a soft towel to wipe off the cleaning solution, gently rub off any stubborn spots.
Use a dry soft towel to dry the hood.
3. DO NOT allow deposits to accumulate or remain on the hood.
4. DO NOT use ordinary steel wool or steel brushes. Small bits of steel may adhere to the surface
and cause rusting.
5. DO NOT allow salt solutions, disinfectants, bleaches, or cleaning compounds to remain in contact
with stainless steel for extended periods. Many of these compounds contain chemicals, which
may be harmful to the hood. Wipe down hood with a water-moistened cloth, then wipe dry with a
clean lint-free cloth.
For Baffle Filter models only: to Clean Baffle Filter/Oil Tunnel
CAUTION: DRAIN OIL FROM BAFFLE FILTER REGULARLY TO PREVENT OVERFLOW.
1. Remove all the baffle filters and the oil tunnel. Note: Not all models have an oil tunnel.
2. Using a sponge, wash them with warm soapy water. Dry them completely before putting them
back into place.
CAUTION: SHARP EDGES.
(Note: Baffle Filters are top rack dishwasher safe)
For Honeycomb Filter models only: to Clean Honeycomb Filter/Oil Tunnel
CAUTION: DRAIN OIL FROM HONEYCOMB FILTER REGULARLY TO PREVENT OVERFLOW.
1. Remove all the honeycomb filters and the oil tunnel. Note: Not all models have an oil tunnel.
2. Using a sponge, wash them with warm soapy water. Dry them completely before putting them
back into place.
CAUTION: SHARP EDGES.
(Note: Honeycomb Filters are top rack dishwasher safe)
Loading ...
Loading ...
Loading ...