Loading ...
Loading ...
Loading ...
Clearing obstructions from your
Motorbar™ cleaner head
Remove cleaner head
Your Motorbar™ cleaner head doesn’t have a washable brush bar.
To maintain optimum performance, check your brush bar regularly
and clear any obstructions.
Unplug and leave your machine to cool before checking for blockages.
Press the button on the back of the Motorbar™ cleaner head and push
upwards 90°to release the end cap.
Pull the brush bar out of the cleaner head.
Remove any hair, thread or debris from around the brush bar.
Be careful of any sharp objects when clearing blockages.
Remove your brush bar
Replace your brush bar
Reassemble the cleaner head
Push the brush bar firmly back into the cleaner head.
Make sure the brush bar is pushed fully into the cleaner head. Rotate the end
cap until it clicks back into the locked position.
Slide your Motorbar™ cleaner head into position on the front of the ball. Push
upwards until the red button on the underside of your machine clicks securely
in place.
Lie your machine on its back.
Push down the red button on the bottom of the ball and then slide your
cleaner head down and off your machine.
Press down on
the top of the
button to release
the cleaner head.
Pull the cleaner
head upwards to
remove it from your
machine.
The button to
release the cleaner
head is located
at the back of the
machine between
the ball and
cleaner head.
The brush bar release button
is located at the back of the
cleaner head.
Loading ...
Loading ...
Loading ...