Loading ...
Loading ...
Loading ...
Caring for your floors
Check that the underside of the cleaner head or tool is clean and free from
any objects that may cause damage.
Before vacuuming your flooring, rugs, and carpets, check the manufacturer’s
recommended cleaning instructions.
The brush bar on your machine can damage certain flooring. Some rug
materials may fuzz if a rotating brush bar is used when vacuuming. If this
happens, we recommend vacuuming without the motorized floor tool and
consulting with your flooring manufacturer.
Using your Motorbar™ cleaner head
Slide the suction control to suit your floor type. Select the right cleaning
mode for the right task.
Position the slider to the left for use on deep- to medium-pile carpets,
delicate flooring and rugs.
Position the slider in the center for low-pile carpets and large debris.
Position the slider to the right for hard floors and ground in dirt.
If your machine is hard to push, use the mode on the left.
Your cleaner head has a motor-driven brush bar with suction control.
Check the manufacturer’s recommended cleaning instructions for your
flooring type.
Turn the brush bar on for
low pile carpets and turn
off for deep pile carpets
and delicate flooring.
The brush bar button
is on the left next to
the power button.
The suction control slider is located on
the front of the cleanerhead.
Loading ...
Loading ...
Loading ...